Yes, chlorine dioxide can be used to support hydration by keeping drinking water purified and fresh, but it must always be properly diluted. To prepare, activate 1 drop of Part A (Sodium Chlorite) + 1 drop of Part B (Activator), wait 30 seconds, then add to 16 oz (2 cups) of clean water. Sip slowly over 1–2 hours. If sensitivity occurs, reduce frequency or pause use.
Step-by-Step Guide
1. Activate the drops
-
In a clean glass, add 1 drop Part A + 1 drop Part B.
-
Wait 30 seconds until the amber yellow color appears.
2. Add to water
-
Pour the activated solution into 16 oz (about 2 cups) of clean water.
3. Sip slowly
-
Drink over 1–2 hours instead of all at once.
-
This allows gradual hydration and gentle cleansing.
4. Frequency
-
Use 1–2 times daily.
-
Always start with a low amount and adjust if needed.
Important: This protocol is for hydration and water purification only. It is not a medical treatment.
Why It Works
Chlorine dioxide is a selective oxidizer that, when activated and diluted in very small amounts, helps maintain clean, microbe-free water.
This ensures every sip of water stays fresh, supporting your body’s natural hydration and detox functions. It’s the same science trusted in municipal water plants, and the same process used in 1NESS® Water Purification Drops, giving you a reliable method for safe hydration at home or on the go.
Related Question
Need the basics first?
Read next: How Do You Use Chlorine Dioxide for Drinking Water Purification?